Product
Your current location:Home  - Product  - ABB
Product Introduction

IGCT module is an integrated gate commutated thyristor module that combines the high-speed switching characteristics of IGBT (insulated gate bipolar transistor) with the high blocking voltage and low conduction loss characteristics of GTO (gate turn off thyristor) to form a composite power semiconductor device.

Description

Many products have not been listed yet. For more products, please contact us

If the product model is inconsistent with the displayed image, the model shall prevail. Please contact us for specific product images, and we will arrange for photos to be taken and confirmed in the warehouse

We have 16 shared warehouses worldwide, so sometimes it may take several hours to accurately return to you. We apologize for any inconvenience caused. Of course, we will respond to your concerns as soon as possible.


3BHL000391P0101 also known as:

IGCT module 3BHL000391P0101

3BHL000391P0101 GCT module

Thyristor module 3BHL000391P0101

3BHL000391P0101 Semiconductor controlled rectifier module

Semiconductor integrated control board 3BHL000391P0101


The 3BHL000391P0101 IGCT module is a power electronic device that integrates the advantages of IGBT (Insulated Gate Bipolar Transistor) and GTO (Gate Turnoff Thyristor) technology. It combines the high-speed switching characteristics of IGBT with the advantages of high blocking voltage and low conduction loss of GTO.


Performance advantages of 3BHL000391P0101 IGCT module:

Efficient performance:

The 3BHL000391P0101 IGCT module combines the advantages of IGBT (insulated gate bipolar transistor) and GTO (gate turn off thyristor), and has the characteristics of low conduction voltage drop and high blocking voltage. For example, certain models of IGCT modules have on state saturation voltage (Vcesat) as low as 2.2V, which helps reduce system heat loss and improve overall efficiency.

At the same time, the IGCT module has a lower conduction resistance, which can achieve efficient power regulation and increase equipment efficiency.

High speed switch:

The 3BHL000391P0101 IGCT module has fast on and off times, which enables it to be used in high-frequency circuits and improves the dynamic response performance of the system. For example, the switching frequency of IGCT modules can reach 20kHz, which is much higher than traditional thyristors and can meet the requirements of modern power electronic systems for high-frequency operation.

Strong ability to withstand high currents:

The IGCT module can withstand large currents and voltages, making it suitable for high-power and high-voltage applications. This makes the IGCT module perform well in applications such as power transmission and distribution systems, electric vehicles, high-speed railways, etc. that require processing a large amount of electrical energy.

High integration:

The 3BHL000391P0101 IGCT module is a highly integrated power electronic device that can achieve high power density in a small space. This high integration not only helps to reduce system volume and weight, but also improves system reliability and stability.

Good thermal conductivity:

The 3BHL000391P0101 IGCT module has good thermal conductivity and can operate stably in high temperature environments. This is very important for power electronic systems that need to work under harsh environmental conditions.

Strong insulation:

The inner and outer shells of the 3BHL000391P0101 IGCT module have good insulation performance, which can avoid electromagnetic interference and other electrical problems, and improve the safety and stability of the system.


Application areas of 3BHL000391P0101 IGCT module:

Frequency converter:

Used to convert DC power into AC power with adjustable frequency and voltage to control the speed and operating status of the motor.

Inverter:

In solar power generation systems, direct current energy is converted into alternating current energy.

Power transmission and distribution:

Converter and inverter used in high-voltage direct current (HVDC) systems to provide efficient and reliable power conversion.

Electric vehicles:

In the electric drive system of an electric vehicle, control the energy conversion of the battery and the driving motor of the electric vehicle.

High speed railway:

Used in high-speed railway power supply systems to provide efficient and reliable energy conversion and transmission.

Renewable energy:

Inverter used in wind and solar power generation systems to convert direct current energy into alternating current energy.

Industrial power control system:

Such as voltage regulators, DC power supplies, arc furnace controllers, etc.


3BHL000391P0101 IGCT module usage:

Thermal management:

In high-power applications, IGCT modules generate a large amount of heat and require appropriate thermal management strategies.

Use cooling devices such as radiators, fans, or water cooling systems to dissipate heat and ensure that the working temperature of the IGCT module is within its allowable range.

Driver circuit design:

Design appropriate driving circuits to ensure fast switching and closing of the IGCT module.

The driving circuit should be able to provide sufficient current and voltage to ensure the normal operation of the IGCT module, taking into account changes in current load and protection circuits.

Protection circuit design:

Design appropriate protection circuits to protect the IGCT module from abnormal working conditions such as voltage fluctuations, overcurrent, over temperature and transient overvoltage.

This includes overcurrent protection, overvoltage protection, and overheating protection, etc.

Module packaging and installation:

Choose module packaging with good heat dissipation performance.

During the installation process, pay attention to the correct installation of connectors and the use of fasteners to ensure good electrical connections and mechanical fixation.

Electromagnetic compatibility (EMC) design:

Take appropriate layout and grounding measures to reduce electromagnetic interference (EMI).

Comply with relevant EMC standards and specifications.

Fault detection and handling:

Ensure that the IGCT module driver has fault detection functions, such as short circuit protection, so that it can respond promptly in the event of a fault and prevent device damage.

Design fault diagnosis and alarm mechanisms to promptly identify and address potential issues.

Other precautions:

Pay attention to the impact of factors such as input power stability, maintenance cycle, and environmental temperature on the performance of IGCT modules.

Perform special tests and calibrations as needed to ensure the normal operation of the IGCT module.

In summary, the 3BHL000391P0101 IGCT module is a high-performance power electronic device that combines the advantages of IGBT and GTO. It has technical characteristics such as voltage type control, low switching loss, high operating frequency, and large component capacity. It is widely used in fields such as frequency converters, inverters, power transmission and distribution systems, and electric vehicles.


Why do many of our products have more competitive prices?

(1) Source procurement to reduce price differences in intermediate links.

(2) Stable channels and more secure supply of goods.

Delivery time:

(1) Inventory products can be arranged for shipment on the same day after signing the contract for payment.

(2) Order products according to the quoted delivery date.

Zhangzhou Fengyun Electrical Equipment Co., Ltd adheres to the corporate philosophy of “spare parts supply chain, enhancing the value of spare parts”.

Our advantage:

Brand new original, with a one-year warranty provided after sales! All of our products have undergone strict testing, and we welcome inquiries and acquisitions. As long as you have sincerity.

Our company will provide you with competitive prices compared to our peers, and we will take orders together!

Fengyun’s internal environment:

The company has a registered capital of tens of millions, a five-star office environment, and hundreds of employees. Fengyun focuses on the four major system fields of DCSPLC, robotics/large servo, and mainly produces various modules/cards, controllers, touch screens, and servo drives.

Company advantages:

Supply imported genuine products and professional discontinued accessories.

Company advantages:

Supply imported genuine products and professional discontinued accessories.


Warehouse discount product recommendation:

07AC91D GJR5252300R0101

PM864AK01 3BSE018161R1

PM861AK01 3BSE018157R1

PM866K01 3BSE050198R1

PM865K01 3BSE031151R1

PM866 3BSE050200R1

PM866AK02 EXC3BSE076939R1

More……

Contact information

Address

Room 205, Office Building, No.1 Chaoyang North Road, Longwen District, Zhangzhou City, Fujian Province

Email

fengyunfadacai@qq.com

Sales consultant

Miss.Green

Whatsapp

+86 15860249102

Online Message

Copyright © 2023-2024 Zhangzhou Fengyun Electrical Equipment Co., Ltd

Copyright © 2023-2024
Zhangzhou Fengyun Electrical Equipment Co., Ltd