Power semiconductor modules are a combination of certain functions and modes, mainly composed of high-power electronic power devices that are combined and encapsulated into one unit according to certain functions. It can achieve different functions by encapsulating different components, such as using air-cooled heat dissipation as a air-cooled module, and using water-cooled heat dissipation as a water-cooled module.
Many products have not been listed yet. For more products, please contact us
If the product model is inconsistent with the displayed image, the model shall prevail. Please contact us for specific product images, and we will arrange for photos to be taken and confirmed in the warehouse
We have 16 shared warehouses worldwide, so sometimes it may take several hours to accurately return to you. We apologize for any inconvenience caused. Of course, we will respond to your concerns as soon as possible.
5SGX10H6004 also known as:
Power semiconductor module 5SGX10H6004
Thyristor module 5SGX10H6004
5SGX10H6004 Semiconductor device
Commutation thyristor 5SGX10H6004
5SGX10H6004 power semiconductor module refers to the combination of multiple power semiconductor devices (such as MOSFETs, IGBTs, etc.) according to specific functions and modes, and forming a whole module through packaging technology.
Working principle of 5SGX10H6004 power semiconductor module:
The basic characteristics of PN junction:
The PN junction is the core structure of power semiconductor devices (such as MOSFETs, IGBTs, etc.), formed by close contact between P-type semiconductors and N-type semiconductors.
When the PN junction is positively biased, electrons move from the N region to the P region, forming a forward current; When the PN junction is reverse biased, electrons cannot pass through the PN junction, forming a reverse cutoff state.
5SGX10H6004 Power Semiconductor Switching Control:
Taking MOSFET (Metal Oxide Semiconductor Field Effect Transistor) as an example, when a positive voltage is applied to the gate, a depletion layer is formed on the surface of the P-region below the gate, causing the conductive channel between the drain and source to be cut off, and the MOSFET achieves a turned off state.
When negative or zero voltage is applied to the gate, the depletion layer disappears, the conductive channel between the drain and source is restored, and the MOSFET achieves a conductive state.
By controlling the gate voltage, the switching control of MOSFETs can be achieved, thereby controlling the on/off of current in the circuit.
The functions of 5SGX10H6004 power semiconductor:
Switch function:
By controlling the switching state of power semiconductors, the on/off control of current in the circuit is achieved, enabling the conversion and transmission of electrical energy.
Zoom in function:
Power semiconductors can also amplify input signals to achieve regulation and control of output signals.
Modulation function:
By controlling the switching frequency and duty cycle of power semiconductors, modulation of output voltage or current can be achieved to meet the needs of different loads.
Combination of 5SGX10H6004 Power Semiconductor Module:
5SGX10H6004 Power Semiconductor Module is a module that combines multiple power semiconductor devices (such as MOSFETs, IGBTs, etc.) according to certain functional combinations and then encapsulates them into one.
This combination can achieve more complex functions such as current control, voltage conversion, power amplification, etc., and improve the reliability and stability of the entire system.
Performance characteristics of 5SGX10H6004 power semiconductor module:
Efficient and precise control:
Power semiconductor devices have the characteristics of low on resistance and low switching loss, which can significantly improve the efficiency of energy conversion.
They can achieve high-speed switching and fast recovery, thereby achieving precise control and response time, improving equipment performance and reliability.
High voltage and high current capability:
Power semiconductor devices have good voltage and current resistance in high voltage and high current applications.
For example, SiC power modules have higher breakdown electric field strength, which means they can operate stably under higher voltage conditions.
High temperature stability:
Power semiconductor devices typically have a higher operating temperature range and lower packaging resistance, enabling them to maintain good performance in high-temperature environments.
SiC power modules can operate at higher temperatures, typically reaching temperatures above 200 degrees Celsius, while silicon power modules can only operate at around 150 degrees Celsius.
Small size and lightweight:
Compared to traditional power equipment, the size and weight of 5SGX10H6004 power semiconductor devices are greatly reduced, which reduces the volume and weight of the equipment, improves its flexibility and mobility.
At the same time, this small size and lightweight also help reduce the cooling needs of electronic devices and lower their cooling costs.
Protection and monitoring functions:
In addition to power semiconductor devices, Intelligent Power Module (IPM) also includes driving circuits, temperature sensors, and current balancing circuits or shunt resistors for current measurement.
These modules typically integrate additional protection and monitoring functions, such as overcurrent and short-circuit protection, driver power supply voltage control, and DC bus voltage measurement.
Rapid response and reduction of electromagnetic interference:
Although the high-speed switching and fast recovery characteristics of 5SGX10H6004 power semiconductor devices improve system efficiency, they may cause electromagnetic interference problems in certain applications.
Therefore, corresponding measures need to be taken in design and application to reduce electromagnetic interference.
Reliability and stability:
The 5SGX10H6004 power semiconductor module undergoes a rigorous manufacturing and testing process to ensure its reliability and stability.
They are widely used in various industrial fields, such as electric vehicles, renewable energy, motor control, etc., to meet the requirements of high reliability and stability.
Thermal resistance performance:
For power semiconductor modules, thermal resistance is an important performance parameter.
Effective heat dissipation and temperature control are key factors in ensuring the normal operation of power semiconductor devices.
Thermal resistance testing can help verify the reliability of power semiconductor modules and ensure the stable operation of automotive electronic systems.
In summary, the 5SGX10H6004 power semiconductor module is a high-performance and highly reliable combination of power electronic devices. By integrating multiple power semiconductor devices and circuits, it achieves efficient conversion and control of electrical energy. With the advancement of technology and the expansion of application areas, the performance and application range of power semiconductor modules will be further improved.
Why do many of our products have more competitive prices?
(1) Source procurement to reduce price differences in intermediate links.
(2) Stable channels and more secure supply of goods.
Delivery time:
(1) Inventory products can be arranged for shipment on the same day after signing the contract for payment.
(2) Order products according to the quoted delivery date.
Zhangzhou Fengyun Electrical Equipment Co., Ltd adheres to the corporate philosophy of “spare parts supply chain, enhancing the value of spare parts”.
Our advantage:
Brand new original, with a one-year warranty provided after sales! All of our products have undergone strict testing, and we welcome inquiries and acquisitions. As long as you have sincerity.
Our company will provide you with competitive prices compared to our peers, and we will take orders together!
Fengyun’s internal environment:
The company has a registered capital of tens of millions, a five-star office environment, and hundreds of employees. Fengyun focuses on the four major system fields of DCS, PLC, robotics/large servo, and mainly produces various modules/cards, controllers, touch screens, and servo drives.
Company advantages:
Supply imported genuine products and professional discontinued accessories.
Company advantages:
Supply imported genuine products and professional discontinued accessories.
Warehouse discount product recommendation:
Address
Room 205, Office Building, No.1 Chaoyang North Road, Longwen District, Zhangzhou City, Fujian Province
fengyunfadacai@qq.com
Sales consultant
Miss.Green
+86 15860249102
