Product
Your current location:Home  - Product  - ABB
Product Introduction

The SUE 3000 high-speed conversion system is a combination of optimized ABB detection devices and magnetic high-speed vacuum circuit breakers. The system allows a conversion time of 30 milliseconds (1/2 cycle) between two synchronous inputs to ensure continuous power supply for critical processes. The high-speed transmission device SUE 3000 is equipped with a fault recorder module for recording and encoding analog and binary data. The number of recorded data channels depends on the initial configuration.

Description

  Many products have not yet been launched, please contact us for more products

  If the product model does not match the displayed image, the model shall prevail. Please contact us for specific product images, and we will arrange for photos to be taken in the warehouse for confirmation

  We have 16 shared warehouses worldwide, so sometimes it may take several hours to accurately return to you. We apologize for any inconvenience caused. Of course, we will respond to your concerns as soon as possible.


  SUE3000 1VCR007346 G0032 High Speed Transmission System HSTS Other names:

  Input/output module SUE3000 1VCF750168801

  SUE3000 1VCR007346 G0032 Controller Module

  Operation panel SUE3000 1VCF750168801

  The SUE 3000 High Speed Transfer System (HSTS) belongs to ABB's SUE 3000 High Speed Transfer System (HSTS) series, which has leading and fast transmission performance.

  The SUE3000 1VCF750168801 high-speed motor bus transmission system ensures continuous power supply to critical loads in the shortest possible time. The SUE 3000 high-speed conversion system is a combination of optimized ABB detection devices and magnetic high-speed vacuum circuit breakers. The system allows a conversion time of 30 milliseconds (1/2 cycle) between two synchronous inputs to ensure continuous power supply for critical processes.

The high-speed transmission device SUE 3000 is equipped with a fault recorder module for recording and encoding analog and binary data. The number of recorded data channels depends on the initial configuration. Up to eight analog signals can record channels and 32 binary signals. The analog input signal is recorded at a sampling rate of 1.2kHz for a period of at least 1000ms to a maximum of 5000ms. The recording time is a combination of pre trigger and post trigger times. Record the process of using a typical circular buffer and save it. The oldest records are always overwritten by new records (FIFO) in terms of features. The number of saved fault records depends on the time of record breaking. For example, up to 5 fault records can be saved with a recording time of 1000 milliseconds. Fault records can be exported and converted through software configuration. The transmission of records can also be done through intercity buses.

  In addition, the possibility of manually initiating transmission (such as for target clearing) greatly simplifies the installation process.

  High speed transmission equipment can easily connect to newly installed switch devices as well as existing switch devices. SUE 3000 supports all commonly used voltage levels. To cover all possible scenarios, the SUE 3000 offers four different motor bus transmission modes.


  Scope

  High speed transmission ensures continuous power supply

  Product advantages

  Avoid costly production interruptions and environmental damage

  Ensure the best guarantee of energy supply

  Ensure the shortest processing time and highest level of safety

  Provide a good solution for protecting important large-scale computer systems combined with rotating loads

  Compared to static and dynamic UPS systems, there are no energy and maintenance costs

  ABB's validated and optimized solutions


  Product Features

  When using high-speed vacuum circuit breakers, the switching time is fast (30 milliseconds or 1/2 cycle)

  HSTS is suitable for switchgear layouts with 2 feeders and 1 common bus (2 circuit breaker configurations), or 2 feeders with 2 bus segments and 1 coupled circuit breaker (3 circuit breaker configurations).

  The system components used include REF 542plus feeder protection relay, SUE 3000 high-speed conversion device, VM1-T high-speed vacuum circuit breaker, and current and voltage sensors/transformers


  All products on this website are special products, and market prices have been fluctuating,

  Please refer to the customer service quotation for details, as the product is new and the price is not genuine,

  Please confirm the model, product, price, and other detailed information with customer service before placing an order. The website has been used,

  The new one is for sale, please contact customer service for further communication.


Recommended models:
SYN6302-5203

SYN6302-5202
SYN6302-4203
SYN6302-4202
SYN6302-2203
SYN6302-2202
SYN6302-1203
SYN6302-1202
SYN6302-0203
SYN6302-0202
SYN6202-5203
SYN6202-5202
SYN6202-4203
SYN6202-4202
SYN6202-2203
SYN6202-2202
SYN6202-1203
SYN6202-1202
SYN6202-0203
SYN6202-0202
SYN6201-5203
SYN6201-5202
SYN6201-4203
SYN6201-4202
more......

Contact information

Address

Room 205, Office Building, No.1 Chaoyang North Road, Longwen District, Zhangzhou City, Fujian Province

Email

fengyunfadacai@qq.com

Sales consultant

Miss.Green

Whatsapp

+86 15860249102

Online Message

Copyright © 2023-2024 Zhangzhou Fengyun Electrical Equipment Co., Ltd

Copyright © 2023-2024
Zhangzhou Fengyun Electrical Equipment Co., Ltd