This Ethernet/IP interface module is designed specifically for use with ABB's AC 800M controller and System 800xA distributed control system (DCS). This module utilizes Ethernet/IP protocol to achieve efficient data exchange, thereby facilitating communication between the controller and external Ethernet devices.

　　Many products have not yet been launched, please contact us for more products

　　If the product model does not match the displayed image, the model shall prevail. Please contact us for specific product images, and we will arrange for photos to be taken in the warehouse for confirmation

　　We have 16 shared warehouses worldwide, so sometimes it may take several hours to accurately return to you. We apologize for any inconvenience caused. Of course, we will respond to your concerns as soon as possible.

　　CI858K01 Other names:

　　Communication module CI858K01

　　CI858K01 Controller Module

　　Analog module CI858K01

　　CI858K01 is an Ethernet/IP communication interface module developed by ABB, specifically designed for integration with the AC 800M controller series. Specially designed for use with ABB's AC 800M controller and System 800xA distributed control system (DCS). This module utilizes Ethernet/IP protocol to achieve efficient data exchange, thereby facilitating communication between the controller and external Ethernet devices. This module uses Ethernet/IP protocol to facilitate communication between AC 800M controllers and external Ethernet devices, which is widely adopted in industrial automation due to its efficiency and robustness.

　　Ethernet/IP is renowned for its high performance, scalability, and robustness, making it ideal for complex industrial environments where real-time data exchange and device coordination are crucial. The CI858K01 module plays a crucial role in these environments, building bridges between devices that may operate independently due to differences in communication protocols.

　　The main specifications and features of CI858K01 include:

　　Protocol support: Supports Ethernet/IP protocol and seamlessly integrates with devices that use this standard for communication. In addition, it can also facilitate DeviceNet communication through LD800DN devices.

　　Transmission speed: This module supports transmission speeds of up to 100 Mbps, providing fast and reliable data transmission rates required for real-time industrial applications.

　　Connectivity: Equipped with an RJ-45 female connector, it ensures easy connection to Ethernet. This module uses CH1 connector for Ethernet connection and supports 100 Mbps.

　　Expansion and compatibility: CI858K01 can be extended through S200CI873IoHwlib to increase support for the S200 I/O adapter 200-ENTR. This extension provides a direct upgrade path for S200 I/O directly connected to various platforms, including SattCon 200, SattLine 200, Advant Controller 210, Advant Controller 250, and AC 800C. The 200-ENTR adapter has two Ethernet ports with built-in switches, allowing the adapter to be daisy chained to CI8733 without the need for an external switch.

　　Communication protocol: Supports EtherNet/IP and DeviceNet protocols, achieving seamless integration with various field devices and third-party systems.

　　Role: Operates as a master device, allowing it to initiate communication with connected slave devices.

　　Data transmission speed: capable of transmitting data at speeds up to 10/100 Mbps, providing fast and reliable communication.

　　Redundancy: Provides module redundancy, allowing for module hot swapping without interrupting operations, thereby improving system reliability.

　　Physical characteristics:

　　Connector type: RJ-45 female head (8-pin)

　　Power consumption: Usually consumes about 160 mA at 24 V.

　　Environmental conditions: The designed working temperature range is+5 to+55 ° C, and the storage temperature range is -40 to+70 ° C. According to IEC/EN 61131-2, its rated altitude can reach up to 2000 meters, with a pollution level of 2 and an anti-corrosion level of G3, in compliance with ISA 71.04 standard. The relative humidity range is 5% to 95%, without condensation, and the protection level is IP20.

　　Certification and Compliance: Meets CE marking requirements and complies with electrical safety standards UL 61010-1, UL 61010-2-201. It is also classified for use in hazardous locations according to UL 60079-15, cULus Class 1, Zone 2, AEx nA IIC T4, ExnA IIC T4Gc X. In addition, it also complies with RoHS and WEEE directives.

　　Compatibility

　　CI858K01 is compatible with System 800xA 6.0.3.3 and higher versions, ensuring interoperability with the latest software versions.

　　It can be used in conjunction with HI controllers to expand the system's ability to handle complex automation tasks.

　　This module supports up to 12 units on the CEX bus, allowing for extensive networking functionality within the system.

　　Environmental conditions: This module is designed to operate under various environmental conditions, with continuous climate operating conditions ranging from 0 to+55 ° C and stored climate operating conditions ranging from -40 to+70 ° C. It meets the IP20 protection level, indicating that it can withstand solid objects with a diameter greater than 12.5 millimeters and water jets from any direction. This module also complies with anti-corrosion standards (compliant with G3 standards), electromagnetic compatibility requirements (according to EMC Directive 2004/108/EC), and electrical safety standards (UL508, IEC/EN 61131-2). According to UL/CSA 60079-15, it is classified as usable for hazardous classification locations.

　　Conclusion

　　The CI858K01 Ethernet/IP interface module is a powerful and versatile addition to the ABB AC 800M controller ecosystem. It supports Ethernet/IP and DeviceNet protocols, has redundancy capabilities, and is compatible with system 800xA, making it an ideal choice for applications that require reliable and efficient communication with external devices. This module complies with strict environmental and safety certifications, further highlighting its suitability for harsh industrial environments. CCI858K01is a key component that enhances the connectivity and interoperability between AC 800M controllers and external Ethernet based devices, making it an important tool for modern industrial automation systems.

　　All products on this website are special products, and market prices have been fluctuating,

　　Please refer to the customer service quotation for details, as the product is new and the price is not genuine,

　　Please confirm the model, product, price, and other detailed information with customer service before placing an order. The website has been used,

　　The new one is for sale, please contact customer service for further communication.

Recommended models:
DASD001
DC732F
CSA463AE
CS513
ICS08B5
CP800
CP405
CP450-T-ETH
CP430T-ETH
CP405-A0
COM0034
COM0003
COM0002
CMA131
CMA130
CM772F
CI930F
GFD233A101
3BHE046836R0102
more......