The Millmate Controller 400 has been designed to offer a wide range of functions while being highly user-friendly. The control unit covers all edge sensor installation possibilities. This means that the user only needs to follow the step-by-step instructions to set up the control unit and calculate the correct strip edge and center position and width.

　　Many products are not available yet, please contact us for more products

　　If the product model is inconsistent with the display picture, the model shall prevail. Please contact us for specific product pictures, and we will arrange to take photos in the warehouse for confirmation

　　We have 76 shared warehouses around the world, so sometimes it may take several hours to accurately return to you, please understand. Of course, we will respond to your concerns as soon as possible.

　　Other names of PFXA401SF:

　　Operating unit PFXA401SF

　　PFXA401SF control unit

　　Editable control unit PFXA401SF

　　PFXA401SF Millmate Controller 400 is designed to provide multiple functions while being highly user-friendly. The control unit covers all installation possibilities of edge sensors. This means that users only need to follow step-by-step instructions to set up the control unit and calculate the correct strip edge and center position and width.

　　PFXA401SF Millmate Controller 400 Features:

　　Versatility: The PFXA401SF Millmate Controller 400 supports all edge sensors and provides real-time strip position and width calculations with filter times starting from 10 milliseconds.

　　User-friendly: The controller is simple to configure and includes analog/digital I/O, edge and width detectors, unit switching and self-diagnostic systems. Users only need to follow the step-by-step instructions to set up the control unit to calculate the correct strip edge and center position and width.

　　Rich external connections: 2 analog inputs with nominal thickness and nominal width settings, 4 analog outputs (voltage or current), 8 digital inputs for control signals, 8 digital outputs and +24V power supply for external devices. At the same time, it is also equipped with 2 RS-232 serial interfaces for external display, control, etc., and high-speed fieldbus is optional.

　　Calculates the real strip position and width relative to the mill

　　Filter times start from 10 ms

　　Easily configure analog/digital inputs/outputs

　　Digital edge position level detector

　　Digital minimum and maximum width level detector

　　Unit selection (mm, inch)

　　Self-diagnostic test system including continuous edge sensor test

　　Simulation mode for easy checking of system integration

　　Technical specifications

　　Dimensions and weight: Dimensions are 380x235x90 mm and weight is 5 kg.

　　Protection level and operating temperature: Protection level is IP20, operating temperature range is 0 to 70 degrees Celsius, storage temperature range is -40 to +70 degrees Celsius.

　　Power supply and power consumption: Power supply voltage is 85-264 V, power consumption is 140 VA.

　　Input and output parameters:

　　Analog input: 0-10V, 10V differential input.

　　Analog output: Voltage 0-10 V, Current 0-20 mA or 4-20 mA.

　　Digital inputs: 0/+24V, isolated 4+4.

　　Digital outputs: 0/+24V, isolated 4+4.

　　Data external connections:

　　2 analog inputs for setting nominal thickness and nominal width

　　4 analog outputs, voltage or current

　　8 digital inputs for control signals

　　8 digital outputs

　　+24 V power supply for external devices, max. 0.5 A

　　Ethernet connection to:

　　- Other Millmate control and operating units

　　- Other control systems with VIP protocol

　　2 RS-232 type serial interfaces for external display, control, etc.

　　High-speed fieldbus (optional)

　　Built-in functions

　　Easy to install: Industrial grade electronics, operating temperature up to 70°C, EMC compliant, no additional housing required.

　　Easy to commission: Step-by-step menu to set up the control unit, predefined standard measurement modes, easily configurable analog/digital input/output ports.

　　Threshold judgment: Provides unit selection (mm, inch) and other functions.

　　Simulation function: Easily check system integration.

　　Easy to maintain/monitor: Equipped with self-diagnostic test system, including sensor test, can import and export setting parameters through PC, support network connection, and can be remotely accessed.

　　Application field

　　PFXA401SF Millmate controller 400 is widely used in steel, nonferrous metals, papermaking and other industries for strip tension control, position detection and width calculation.

　　All products on this website are special products, and market prices have been fluctuating.

　　Specific quotation is subject to customer service, because the product is new, the price is not real,

　　Please confirm the model and product, price and other details with customer service before placing an order. The website has been used.

　　New ones are on sale, please contact customer service for communication.

Related product recommendations:
PM511V16 3BSE011181R1
PM511V08 3BSE011180R1
PM866K01 3BSE050198R1
PM633 3BSE008062R1
PM802F 3BDH000002R1
PM820-1 3BSE010797R1
PM825 3BSE010796R1
3BSE010800R1 PM825-1
3BSE093350R1 PM858-C
PM861AK01 3BSE018157R1
3BSE018105R1 PM861K01
3BSE018161R2 PM864AK01-eA
3BSE030193R1 PM865
PM864AK01 3BSE01816R1
3BSE031151R1 PM865K01
PM866-2 3BSE050201R1
3BSE081638R1 PM867K02
3BSE076355R1 PM867K01
More......