Synchronization units are widely used in power stations or industrial installations with their own power generating facilities, where the generators need to be paralleled with an island line or a public line, or in power distribution systems.Power circuit breakers may only be closed if both voltages are at least approximately synchronous (coincident). Otherwise, faults in line operation, loading of the generators and, in extreme cases, damage to the generators can result.

　　Many products have not yet been launched, please contact us for more products

　　If the product model does not match the displayed image, the model shall prevail. Please contact us for specific product images, and we will arrange for photos to be taken in the warehouse for confirmation

　　We have 16 shared warehouses worldwide, so sometimes it may take several hours to accurately return to you. We apologize for any inconvenience caused. Of course, we will respond to your concerns as soon as possible.

　　SYN5200a-Z,V217 3BHB006713R0217 Other names:

　　Synchronous device SYN5200a-Z,V217 3BHB006713R0217

　　SYN5200a-Z,V217 3BHB006713R0217 synchronization device

　　Control system module SYN5200a-Z,V217 3BHB006713R0217

　　SYN5200a-Z,V217 3BHB006713R0217 Multi channel Unit Module

　　SYNCHROTACT® MSP (Modular Synchronizing Panel) is a modular synchronizing system to synchronize generators and to parallel lines, built into a cubicle.

　　The measuring and metering feature, which is available in addition to the synchronizing system uses space conditions and already available signals in an optimum way.

　　The SYNCHROTACT® MSP includes:

　　SYNCHROTACT 5 Synchronizing system

　　• Automatic single or dual channel synchronizing system

　　• Manual synchronizing by means of a synchrocheck

　　• Local control panel

　　Electrical measuring and metering system

　　• Measuring system using transducers

　　• Metering system using power and energy meters

　　The system uses the proven and reliable SYNCHROTACT® 5 - components. Basically the synchronizing part includes an automatic and a redundant synchronizing feature (automatic or manual).

　　The modular concept allows to adapt the synchronizing system individually.

　　The following options are available:

　　1. Safety: single or dual channel solutions

　　2. Availability: redundant manual synchronizing or redundant automatic synchronizing or both

　　3. Number of circuit breakers to be synchronized: 1 to 4 CB's, one or more of them may be generator breakers

　　4. Power supply: in case of a redundant synchronizing, the power supply on the cubicle entrance can be redundant too.

　　5. Control: The control of the synchronizing is possible from remote in any case. An alternative local control is available as an option.

　　6. Adaptation of the measuring voltages: especially with synchronizing of several circuit breakers it may occur that the two secondary voltages have different amplitudes and phase angles with closed circuit breaker.

　　Synchronizing concept

　　Regarding availability, different solutions are possible:

　　Automatic synchronizing (sketch shows dual channel version) including separate synchrocheck

　　for redundant manual synchronizing (with its own hardware and power supply)

　　Automatic synchronizing (sketch shows dual channel version) using parameter set 7 as synchrocheck for manual synchronization.

　　Redundant, automatic dual channel synchronizing with the additional possibility of a manual synchronization (using parameter set 7)

　　The PC software SynView which is included with the delivery allows commissioning to be carried out quickly and simply.

　　The dead bus function, i.e., connection of voltage-free lines is possible in any case. Each individual situation can be included or excluded individually by parameter setting.

　　The measuring and metering part is available as an option. 3-phase voltage and current signals of a measuring point (e.g. gnerator, UAT, high voltage side) are used for measuring and metering.

　　The values calculated from these signals can be locally displayed or are available as output signals.

　　Up to seven programmable

　　transducers with a three phase

　　current and voltage input each,

　　as well as four analog outputs to

　　display P, Q, S, U, I, f, pf

　　Up to four multifunctional power

　　meters with a three phase

　　current and voltage input each,

　　as well as four analog outputs to

　　display P, Q, S, U, I, f, pf;

　　accuracy class 0.5

　　Up to two energy meters with a

　　three phase current and voltage

　　input each; display of P, Q, S;

　　accuracy class 0.2, 0.5 and 1.0;

　　certified for clearing purposes

　　All products on this website are special products, and market prices have been fluctuating,

　　Please refer to the customer service quotation for details, as the product is new and the price is not genuine,

　　Please confirm the model, product, price, and other detailed information with customer service before placing an order. The website has been used,

　　The new one is for sale, please contact customer service for further communication.

Related product recommendations:
HIEE300927R0101
UAD206A101
UAD155A0111
3BHE029110R0111
3BHE026866R0101
UAD154A
UAD149A1501
3BHE014135R0001
UAD149A00-0-11 
UAC389AE02
UAD142A01
UAC389AE01
AC389AE01 
HIEE300888R0001
more......