The 3500/53 electronic overspeed detection system, as part of the 3500 series mechanical detection system, is a highly reliable and responsive redundant tachometer system specifically designed for mechanical overspeed protection. The system aims to monitor the speed of mechanical equipment and provide overspeed protection when the speed exceeds the preset safety limit to prevent equipment damage or safety accidents.

Many products have not been listed yet. For more products, please contact us

If the product model is inconsistent with the displayed image, the model shall prevail. Please contact us for specific product images, and we will arrange for photos to be taken and confirmed in the warehouse

We have 16 shared warehouses worldwide, so sometimes it may take several hours to accurately return to you. We apologize for any inconvenience caused. Of course, we will respond to your concerns as soon as possible.

133396-01 also known as:

Overspeed detection system 133396-01

133396-01 Overspeed detection module

Overspeed detection I/O module 133396-01

133396-01 Electronic overspeed device

Electronic overspeed monitor 133396-01

The 133396-01 electronic overspeed detection system is an important component of the 3500 series mechanical detection system, specifically designed to provide mechanical overspeed protection. This system is known for its high reliability and fast response ability, and is one of the key equipment to ensure the safe operation of mechanical equipment.

The 133396-01 electronic overspeed detection system mainly consists of the following parts:

Overspeed detection module:

Responsible for receiving speed signals from sensors, processing and analyzing them. Each module can work independently and communicate and coordinate with other modules.

Sensors:

Including eddy current sensors and magnetic sensors, used to measure the speed of mechanical equipment. These sensors convert speed signals into electrical signals and transmit them to the overspeed detection module for processing.

Redundant power supply:

To ensure the stable operation of the system, the 133396-01 electronic overspeed detection system needs to be equipped with redundant power supplies. In this way, in the event of a single power failure, the system can still maintain normal operation.

The characteristics of the 133396-01 electronic overspeed detection system:

Highly reliable:

The 133396-01 electronic overspeed detection system adopts a redundant design to ensure that the system can still operate normally in the event of a single fault. This design greatly improves the reliability and stability of the system.

Quick response:

The system can quickly detect and respond to overspeed events, ensuring that immediate measures can be taken to protect mechanical equipment from damage or accidents.

Redundant tachometer system:

The system improves the accuracy and reliability of detection by monitoring and comparing multiple tachometers. At the same time, it also supports multiple sensor inputs, including eddy current sensors and magnetic sensors, to meet different application requirements.

The main application areas of the 133396-01 electronic overspeed detection system are:

Rotating mechanical equipment:

This system is widely used in the overspeed protection of rotating machinery equipment such as gas turbines, steam turbines, compressors, etc. By monitoring the speed of the equipment in real time and triggering an alarm or shutdown protection when the preset safe speed is exceeded, the safe operation of the equipment is ensured.

Process Industry:

In process industries such as petroleum, chemical, and metallurgy, many critical equipment needs to ensure safe operation within a safe speed range. The 133396-01 electronic overspeed detection system can reliably monitor the speed of these devices and provide overspeed protection when necessary to prevent equipment damage or production interruption.

Electricity industry:

In the power industry, the safe operation of rotating equipment such as generators is crucial. This system can be used to monitor the speed of the generator, ensure its operation within the rated speed range, and prevent faults or accidents caused by overspeed.

The main steps and precautions for configuring the 133396-01 electronic overspeed detection system:

System installation:

Firstly, it is necessary to install the 133396-01 overspeed detection module in the appropriate slot of the 3500 series rack. During installation, ensure that the connection between the module and the rack is firm and reliable, and follow the relevant installation instructions and precautions.

Sensor connection:

Connect speed measurement devices such as eddy current sensors or magnetic sensors to the input of the overspeed detection module. During the connection process, ensure that the signal wire of the sensor corresponds correctly to the input terminal of the module, and check if the connection is firm and reliable.

Alarm settings:

Set the overspeed alarm point using the 3500 rack configuration software. The setting of alarm points should be comprehensively considered based on factors such as the rated speed, safe speed range, and actual operating experience of the equipment. During the setting process, it should be ensured that the alarm points are set reasonably and accurately to avoid false alarms or omissions.

System testing:

After completing the configuration, a comprehensive test of the system should be conducted to verify its performance and reliability. During the testing process, different overspeed situations can be simulated to check the response speed and accuracy of the system. At the same time, it is necessary to check whether the alarm output and relay action of the system are working properly.

Maintenance and upkeep:

During the operation of the system, regular maintenance and upkeep should be carried out to ensure its long-term stable operation. Maintenance work includes checking the installation status of sensors, cleaning the internal dust and dirt of modules, and updating the firmware and software of the system.

In summary, the 133396-01 electronic overspeed detection system is a highly reliable and responsive overspeed protection system. It ensures the accuracy and reliability of the system through redundant design and multiple sensor inputs. At the same time, the system also has a wide range of application areas and flexible configuration functions, providing reliable overspeed protection solutions for various mechanical equipment.

Why do many of our products have more competitive prices?

(1) Source procurement to reduce price differences in intermediate links.

(2) Stable channels and more secure supply of goods.

Delivery time:

(1) Inventory products can be arranged for shipment on the same day after signing the contract for payment.

(2) Order products according to the quoted delivery date.

Zhangzhou Fengyun Electrical Equipment Co., Ltd adheres to the corporate philosophy of “spare parts supply chain, enhancing the value of spare parts”.

Our advantage:

Brand new original, with a one-year warranty provided after sales! All of our products have undergone strict testing, and we welcome inquiries and acquisitions. As long as you have sincerity.

Our company will provide you with competitive prices compared to our peers, and we will take orders together!

Fengyun’s internal environment:

The company has a registered capital of tens of millions, a five-star office environment, and hundreds of employees. Fengyun focuses on the four major system fields of DCS, PLC, robotics/large servo, and mainly produces various modules/cards, controllers, touch screens, and servo drives.

Company advantages:

Supply imported genuine products and professional discontinued accessories.

Company advantages:

Supply imported genuine products and professional discontinued accessories.

Warehouse discount product recommendation:

07AC91D GJR5252300R0101

PM864AK01 3BSE018161R1

PM861AK01 3BSE018157R1

PM866K01 3BSE050198R1

PM865K01 3BSE031151R1

PM866 3BSE050200R1

PM866AK02 EXC3BSE076939R1

More……