Product
Your current location:Home  - Product  - BENTLY
Product Introduction
Description

Many products have not been listed yet. For more products, please contact us

If the product model is inconsistent with the displayed image, the model shall prevail. Please contact us for specific product images, and we will arrange for photos to be taken and confirmed in the warehouse

We have 16 shared warehouses worldwide, so sometimes it may take several hours to accurately return to you. We apologize for any inconvenience caused. Of course, we will respond to your concerns as soon as possible.


140734-01 also known as:

Proximitor monitor module 140734-01

140734-01 Proximitor display

Proximitor real-time monitor 140734-01

140734-01 Four channel monitor

Proximity monitor 140734-01


The 140734-01 Proximitor Monitor is a four channel monitor that receives input from proximity sensors, processes signals to generate various vibration and displacement measurements, and compares these processed signals with user programmable alarm setpoints.


The working principle of the 140734-01 Proximitor Monitor:

Signal input:

The 140734-01 receives input signals from proximity sensors, which reflect the vibration and displacement of the equipment.

Signal processing:

By using built-in signal conditioning circuits, the input signal is amplified, filtered, and processed to generate various vibration and displacement measurements.

Alarm comparison:

Compare the processed signal with the user programmable alarm set point, and if the measured value exceeds the alarm threshold, trigger the corresponding alarm.

Output feedback:

Feedback monitoring results and alarm information to the monitoring system or control equipment through digital or analog output.


The main characteristics of the 140734-01 Proximitor Monitor:

Multi channel design:

The 140734-01 provides four independent monitoring channels, each of which can be independently configured and perform specific monitoring tasks.

Programmable alarms:

Users can configure software to set warning and danger alarm values for each channel, as well as the delay time for alarms, according to their actual needs.

High precision measurement:

This monitor has a high-precision signal conditioning circuit, which can ensure accurate and reliable measurement of vibration and position.

Strong compatibility:

It can be connected to various types of proximity probes, such as eddy current probes and capacitance probes, to meet different monitoring needs.

Communication interface:

Some models may include communication interfaces such as RS-485, Ethernet, or Modbus for remote monitoring and integration with larger control or data acquisition systems.


The main functions of the 140734-01 Proximitor Monitor are:

Monitoring and measurement:

This monitor is capable of receiving and processing signals from proximity sensors, generating accurate measurements of mechanical vibration and displacement.

Alarm function:

By continuously comparing the current value of machine vibration with the alarm value in the configuration, once the preset threshold is exceeded, the alarm system will be driven to protect the machine from potential damage.

Information provided:

Provide real-time vibration information of critical equipment to operators and maintenance personnel, helping them to timely understand the equipment status and make corresponding maintenance or adjustments.


Advantages of 140734-01 Proximitor Monitor Applications:

Improving device security:

Through real-time monitoring and alarm functions, equipment faults and abnormal situations can be detected in a timely manner to avoid equipment damage and safety accidents.

Reduce maintenance costs:

Providing accurate vibration and displacement information helps operators and maintenance personnel understand equipment status, develop reasonable maintenance plans, and reduce maintenance costs.

Improve production efficiency:

Ensure that the equipment operates in optimal condition, reduce downtime caused by equipment failures, and improve production efficiency.


Application of 140734-01 Proximitor Monitor:

Rotating machinery monitoring:

140734-01 is widely used in power plants, wind power plants, petrochemical plants, and steel smelting plants to monitor parameters such as vibration, shaft displacement, and expansion of large rotating machinery (such as steam turbines, compressors, generators, fans, etc.). This helps to detect and prevent potential mechanical failures early on, such as imbalance, misalignment, bearing damage, etc.

Static and dynamic displacement monitoring:

In situations where precise position control or displacement monitoring is required, such as stroke monitoring of hydraulic cylinders, valves, pumps, and other equipment, the 140734-01 can provide high-precision displacement measurement data to ensure that the equipment operates in the correct position.

Key component health monitoring:

For health monitoring of key components such as gearboxes, bearings, couplings, etc., the 140734-01 can track their vibration characteristics in real time, predict the remaining life of components through trend analysis and fault diagnosis algorithms, and provide data support for preventive maintenance.

Remote monitoring and system integration:

Through communication interfaces such as Ethernet and Modbus, the 140734-01 can be easily integrated into a wider range of monitoring systems or data acquisition platforms, achieving remote monitoring and data sharing, and improving the intelligence level of the entire system.

In summary, the 140734-01 Proximitor Monitor is a powerful and technologically advanced mechanical condition monitoring device. It provides real-time vibration information of critical equipment to operators and maintenance personnel by receiving and us signals from proximity sensors, and protects the machine from potential damage through alarm functions. 

This monitor has advantages such as multi-channel design, programmability, high precision, and wide application scenarios, and is one of the indispensable and important equipment in modern industrial fields.


Why do many of our products have more competitive prices?

(1) Source procurement to reduce price differences in intermediate links.

(2) Stable channels and more secure supply of goods.

Delivery time:

(1) Inventory products can be arranged for shipment on the same day after signing the contract for payment.

(2) Order products according to the quoted delivery date.

Zhangzhou Fengyun Electrical Equipment Co., Ltd adheres to the corporate philosophy of “spare parts supply chain, enhancing the value of spare parts”.

Our advantage:

Brand new original, with a one-year warranty provided after sales! All of our products have undergone strict testing, and we welcome inquiries and acquisitions. As long as you have sincerity.

Our company will provide you with competitive prices compared to our peers, and we will take orders together!

Fengyun’s internal environment:

The company has a registered capital of tens of millions, a five-star office environment, and hundreds of employees. Fengyun focuses on the four major system fields of DCSPLC, robotics/large servo, and mainly produces various modules/cards, controllers, touch screens, and servo drives.

Company advantages:

Supply imported genuine products and professional discontinued accessories.

Company advantages:

Supply imported genuine products and professional discontinued accessories.


Warehouse discount product recommendation:

07AC91D GJR5252300R0101

PM864AK01 3BSE018161R1

PM861AK01 3BSE018157R1

PM866K01 3BSE050198R1

PM865K01 3BSE031151R1

PM866 3BSE050200R1

PM866AK02 EXC3BSE076939R1

More……

Contact information

Address

Room 205, Office Building, No.1 Chaoyang North Road, Longwen District, Zhangzhou City, Fujian Province

Email

fengyunfadacai@qq.com

Sales consultant

Miss.Green

Whatsapp

+86 15860249102

Online Message

Copyright © 2023-2024 Zhangzhou Fengyun Electrical Equipment Co., Ltd

Copyright © 2023-2024
Zhangzhou Fengyun Electrical Equipment Co., Ltd