Product
Your current location:Home  - Product  - FOXBORO
Product Introduction

A multi port serial card is a device that can allocate multiple serial/parallel ports for terminal connections, and each terminal can communicate with the host through it. The serial port mentioned here usually refers to serial communication interfaces such as RS232, RS422, and RS485, while the parallel port refers to the PARALLE PORT, a 25 pin parallel interface, also known as a printer interface.

Description

Many products have not been listed yet. For more products, please contact us

If the product model is inconsistent with the displayed image, the model shall prevail. Please contact us for specific product images, and we will arrange for photos to be taken and confirmed in the warehouse

We have 16 shared warehouses worldwide, so sometimes it may take several hours to accurately return to you. We apologize for any inconvenience caused. Of course, we will respond to your concerns as soon as possible.


FBM05 also known as:

Multi port serial card FBM05

FBM05 Connector junction box

Fieldbus module FBM05

FBM05 Discrete I/O module


FBM05 is a specific model of serial interface component commonly used in automation control systems. It provides 8 thermal resistance (RTD) input channels, each of which can accept 2-wire or 3-wire RTD sensor inputs within the resistance range of 0 to 320 ohms.


The basic composition of FBM05 multi port serial card:

Hardware structure:

Shell:

FBM05 adopts a dense design and a sturdy pressed aluminum casing, providing physical protection for electronic circuits.

Installation method:

Supports DIN rail or rack installation, making it easy for users to deploy according to their actual needs.

Number of ports:

Based on specific design and usage, FBM05 provides multiple serial ports (although the specific number is not explicitly mentioned in the reference article, a multi port serial card typically means it has more than one serial port).


Electrical characteristics:

Electrical isolation:

Each analog input is electrically isolated from other channels and ground to ensure the safety and accuracy of data.

Input channel:

FBM05 provides multiple thermal resistance (RTD) input channels, each of which can accept 2-wire or 3-wire RTD sensor inputs within the resistance range of 0 to 320 ohms.


Scanning and filtering:

Scanning frequency:

Using Sigma Delta data conversion, scanning every 25 milliseconds to ensure fast response.

Filtering function:

The configurable moving average filter can remove any process noise and power line frequency interference, improving data quality.


Communication interface:

Fieldbus communication:

The communication between FBM05 and the main control station is achieved through an optional redundant 10Mbps Ethernet based fieldbus.

Communication protocol conversion:

The fieldbus communication component FCM is used for the conversion between the communication protocol used by FBM and the communication protocol used by Ethernet fieldbus.

Redundant design:

The communication information received by FBM05 comes from any path (A or B) on the redundant Ethernet fieldbus, ensuring the reliability and stability of communication.

Substrate installation:

The FBM05 component is installed on a DIN mounting substrate, which can accommodate multiple fieldbus components.


The working principle of FBM05 multi port serial card:

Signal input and isolation:

FBM05 provides multiple (usually 8) thermal resistance (RTD) input channels.

Each channel can accept 2-wire or 3-wire RTD sensor inputs within the resistance range of 0 to 320 ohms.

Each analog input is electrically isolated from other channels and ground to ensure data independence and safety.

Signal processing:

Use Sigma Delta data conversion technology to convert signals from RTD sensors.

Scan the input channel every 25 milliseconds to ensure fast response and real-time performance.

A configurable moving average filter is used to remove any process noise and power line frequency interference to improve data accuracy.

Communication interface and protocol:

FBM05 communicates with the main control station through an optional redundant 10Mbps Ethernet based fieldbus.

The Fieldbus Communication Module (FCM) is used to convert between the communication protocol used by FBM and the communication protocol used by Ethernet fieldbus.

Support redundant communication paths (A or B), once a path fails or is switched by the system, components can continue to communicate through the active path to ensure system reliability.

Substrate installation and connection:

FBM05 is installed on a DIN mounting substrate, which can accommodate multiple fieldbus components.

The substrate supports DIN rail installation or rack installation, making it convenient for users to deploy according to their actual needs.

The substrate is also equipped with redundant fieldbus connection sockets, independent DC sockets, and I/O cable sockets for easy connection and maintenance.

Fault diagnosis and status monitoring:

The light-emitting diode (LED) installed on the panel is used to indicate the working status of the fieldbus components, facilitating user fault diagnosis and status monitoring.

Maintenance and replacement:

FBM05 supports hot swapping function, which can be performed without interrupting system operation, improving system maintenance and reliability.

In summary, the FBM05 multi port serial card is an interface component designed specifically for automation control systems, providing 8 thermal resistance input channels, with characteristics such as electrical isolation, fast scanning, filtering, and reliable communication. Its design considers protection in harsh environments, supports redundant communication paths, and ensures data accuracy and communication stability. In addition, FBM05 also supports DIN rail or rack installation, making it convenient for users to deploy according to their actual needs.


Why do many of our products have more competitive prices?

(1) Source procurement to reduce price differences in intermediate links.

(2) Stable channels and more secure supply of goods.

Delivery time:

(1) Inventory products can be arranged for shipment on the same day after signing the contract for payment.

(2) Order products according to the quoted delivery date.

Zhangzhou Fengyun Electrical Equipment Co., Ltd adheres to the corporate philosophy of “spare parts supply chain, enhancing the value of spare parts”.

Our advantage:

Brand new original, with a one-year warranty provided after sales! All of our products have undergone strict testing, and we welcome inquiries and acquisitions. As long as you have sincerity.

Our company will provide you with competitive prices compared to our peers, and we will take orders together!

Fengyun’s internal environment:

The company has a registered capital of tens of millions, a five-star office environment, and hundreds of employees. Fengyun focuses on the four major system fields of DCSPLC, robotics/large servo, and mainly produces various modules/cards, controllers, touch screens, and servo drives.

Company advantages:

Supply imported genuine products and professional discontinued accessories.

Company advantages:

Supply imported genuine products and professional discontinued accessories.


Warehouse discount product recommendation:

07AC91D GJR5252300R0101

PM864AK01 3BSE018161R1

PM861AK01 3BSE018157R1

PM866K01 3BSE050198R1

PM865K01 3BSE031151R1

PM866 3BSE050200R1

PM866AK02 EXC3BSE076939R1

More……

Contact information

Address

Room 205, Office Building, No.1 Chaoyang North Road, Longwen District, Zhangzhou City, Fujian Province

Email

fengyunfadacai@qq.com

Sales consultant

Miss.Green

Whatsapp

+86 15860249102

Online Message

Copyright © 2023-2024 Zhangzhou Fengyun Electrical Equipment Co., Ltd

Copyright © 2023-2024
Zhangzhou Fengyun Electrical Equipment Co., Ltd