A multi port serial card is a device that can allocate multiple serial/parallel ports for terminal connections, and each terminal can communicate with the host through it. The serial port mentioned here usually refers to serial communication interfaces such as RS232, RS422, and RS485, while the parallel port refers to the PARALLE PORT, a 25 pin parallel interface, also known as a printer interface.
Many products have not been listed yet. For more products, please contact us
If the product model is inconsistent with the displayed image, the model shall prevail. Please contact us for specific product images, and we will arrange for photos to be taken and confirmed in the warehouse
We have 16 shared warehouses worldwide, so sometimes it may take several hours to accurately return to you. We apologize for any inconvenience caused. Of course, we will respond to your concerns as soon as possible.
FBM201D P0922YK also known as:
Multi port serial card FBM201D P0922YK
FBM201D P0922YK Connector junction box
Fieldbus module FBM201D P0922YK
FBM201D P0922YK Discrete I/O module
FBM201D P0922YK is a specific model of serial interface component commonly used in automation control systems. It provides 8 thermal resistance (RTD) input channels, each of which can accept 2-wire or 3-wire RTD sensor inputs within the resistance range of 0 to 320 ohms.
The basic composition of FBM201D P0922YK multi port serial card:
Hardware structure:
Shell:
FBM201D P0922YK adopts a dense design and a sturdy pressed aluminum casing, providing physical protection for electronic circuits.
Installation method:
Supports DIN rail or rack installation, making it easy for users to deploy according to their actual needs.
Number of ports:
Based on specific design and usage, FBM201D P0922YK provides multiple serial ports (although the specific number is not explicitly mentioned in the reference article, a multi port serial card typically means it has more than one serial port).
Electrical characteristics:
Electrical isolation:
Each analog input is electrically isolated from other channels and ground to ensure the safety and accuracy of data.
Input channel:
FBM201D P0922YK provides multiple thermal resistance (RTD) input channels, each of which can accept 2-wire or 3-wire RTD sensor inputs within the resistance range of 0 to 320 ohms.
Scanning and filtering:
Scanning frequency:
Using Sigma Delta data conversion, scanning every 25 milliseconds to ensure fast response.
Filtering function:
The configurable moving average filter can remove any process noise and power line frequency interference, improving data quality.
Communication interface:
Fieldbus communication:
The communication between FBM201D P0922YK and the main control station is achieved through an optional redundant 10Mbps Ethernet based fieldbus.
Communication protocol conversion:
The fieldbus communication component FCM is used for the conversion between the communication protocol used by FBM and the communication protocol used by Ethernet fieldbus.
Redundant design:
The communication information received by FBM201D P0922YK comes from any path (A or B) on the redundant Ethernet fieldbus, ensuring the reliability and stability of communication.
Substrate installation:
The FBM201D P0922YK component is installed on a DIN mounting substrate, which can accommodate multiple fieldbus components.
The working principle of FBM201D P0922YK multi port serial card:
Signal input and isolation:
FBM201D P0922YK provides multiple (usually 8) thermal resistance (RTD) input channels.
Each channel can accept 2-wire or 3-wire RTD sensor inputs within the resistance range of 0 to 320 ohms.
Each analog input is electrically isolated from other channels and ground to ensure data independence and safety.
Signal processing:
Use Sigma Delta data conversion technology to convert signals from RTD sensors.
Scan the input channel every 25 milliseconds to ensure fast response and real-time performance.
A configurable moving average filter is used to remove any process noise and power line frequency interference to improve data accuracy.
Communication interface and protocol:
FBM201D P0922YK communicates with the main control station through an optional redundant 10Mbps Ethernet based fieldbus.
The Fieldbus Communication Module (FCM) is used to convert between the communication protocol used by FBM and the communication protocol used by Ethernet fieldbus.
Support redundant communication paths (A or B), once a path fails or is switched by the system, components can continue to communicate through the active path to ensure system reliability.
Substrate installation and connection:
FBM201D P0922YK is installed on a DIN mounting substrate, which can accommodate multiple fieldbus components.
The substrate supports DIN rail installation or rack installation, making it convenient for users to deploy according to their actual needs.
The substrate is also equipped with redundant fieldbus connection sockets, independent DC sockets, and I/O cable sockets for easy connection and maintenance.
Fault diagnosis and status monitoring:
The light-emitting diode (LED) installed on the panel is used to indicate the working status of the fieldbus components, facilitating user fault diagnosis and status monitoring.
Maintenance and replacement:
FBM201D P0922YK supports hot swapping function, which can be performed without interrupting system operation, improving system maintenance and reliability.
In summary, the FBM201D P0922YK multi port serial card is an interface component designed specifically for automation control systems, providing 8 thermal resistance input channels, with characteristics such as electrical isolation, fast scanning, filtering, and reliable communication. Its design considers protection in harsh environments, supports redundant communication paths, and ensures data accuracy and communication stability. In addition, FBM201D P0922YK also supports DIN rail or rack installation, making it convenient for users to deploy according to their actual needs.
Why do many of our products have more competitive prices?
(1) Source procurement to reduce price differences in intermediate links.
(2) Stable channels and more secure supply of goods.
Delivery time:
(1) Inventory products can be arranged for shipment on the same day after signing the contract for payment.
(2) Order products according to the quoted delivery date.
Zhangzhou Fengyun Electrical Equipment Co., Ltd adheres to the corporate philosophy of “spare parts supply chain, enhancing the value of spare parts”.
Our advantage:
Brand new original, with a one-year warranty provided after sales! All of our products have undergone strict testing, and we welcome inquiries and acquisitions. As long as you have sincerity.
Our company will provide you with competitive prices compared to our peers, and we will take orders together!
Fengyun’s internal environment:
The company has a registered capital of tens of millions, a five-star office environment, and hundreds of employees. Fengyun focuses on the four major system fields of DCS, PLC, robotics/large servo, and mainly produces various modules/cards, controllers, touch screens, and servo drives.
Company advantages:
Supply imported genuine products and professional discontinued accessories.
Company advantages:
Supply imported genuine products and professional discontinued accessories.
Warehouse discount product recommendation:
Address
Room 205, Office Building, No.1 Chaoyang North Road, Longwen District, Zhangzhou City, Fujian Province
fengyunfadacai@qq.com
Sales consultant
Miss.Green
+86 15860249102
