The analog multiplexer receiver is a multi-channel temperature converter produced by MTL Instruments. It can convert the analog signals of multiple temperature sensors into standard signals (such as 4-20mA) for use in monitoring and control systems. At the same time, the device also has a multiplexing function, which can save installation time, space and weight, and reduce the cost of installing hazardous area wiring. It is mainly used to receive multiple analog signals from hazardous areas and transmit them to safe areas via data highways.

　　Many products are not yet on the shelves, please contact us for more products

　　If the product model is inconsistent with the display picture, the model shall prevail. Please contact us for specific product pictures, and we will arrange to take photos in the warehouse for confirmation

　　We have 76 shared warehouses around the world, so sometimes it may take several hours to return to you accurately, please understand. Of course, we will respond to your concerns as soon as possible.

　　MTL5053 other names:

　　Input and output controller MTL5053

　　MTL5053 analog module

　　Conversion controller MTL5053

　　MTL5053 is a multi-channel temperature converter produced by MTL Instruments, which can convert the analog signals of multiple temperature sensors into standard signals (such as 4-20mA) for the use of monitoring and control systems. At the same time, the device also has a multiplexing function, which can save installation time, space and weight, and reduce the cost of installing wiring in hazardous areas. It is mainly used to receive multiple analog signals from hazardous areas and transmit them to safe areas via data highways.

　　Main features

　　Multi-channel input: MTL5053 supports connecting multiple temperature sensors, and each channel can be configured independently to monitor multiple temperature points. Supports state transmission of 32 analog inputs, each data highway consists of a simple pair of twisted pairs, and the transmission distance can reach 500 meters.

　　Signal conversion: The device is able to convert the analog signal of the temperature sensor into a standard signal, such as 4-20mA, which helps the digital control system to process the temperature data.

　　High precision: MTL5053 has high-precision temperature measurement and conversion functions to ensure the accuracy of temperature data.

　　Explosion-proof design: For some special environments, the device may have an explosion-proof design to adapt to places with higher dangers.

　　Communication interface: MTL5053 is usually equipped with a communication interface, such as RS485 Modbus protocol, to transmit digital temperature data to a monitoring system or recording device.

　　Flexible configuration: The device has flexible configuration options and can be customized according to different application requirements.

　　Dual RS485 Modbus serial data outputs are provided, supporting Modbus ASCII or RTU protocols.

　　Configurable through PCS83 software, supporting thermocouple and RTD type input configurations.

　　With multiple installation options, including installation in hazardous areas or safe areas.

　　Provide input noise suppression function, able to maintain signal stability at various frequencies.

　　Support redundant data highways, increasing system reliability.

　　Technical parameters

　　Number of data highways: 2 dual redundant (one or both can be used).

　　Unit location: safe area.

　　Input noise suppression: up to 0.5mA peak-to-peak at 100 to 1000Hz, or 1mA peak-to-peak at up to 50Hz.

　　Output type: Dual RS485 Modbus protocol system.

　　System protocol: Modbus ASCII or RTU serial.

　　Communication parameters: Baud rate 300 to 19200.

　　Configuration and Debugging

　　Configuration: The configuration of MTL5053 usually involves setting the address, communication parameters, and the type of input channel. These settings can be made through the status switch on the device or the configuration software.

　　Debugging: After the configuration is completed, the device needs to be debugged to ensure that it works properly. During the debugging process, the configuration software can be used to view the communication status and data transmission, and adjust them as needed.

　　Safety and Maintenance

　　Safety: MTL5053 has overload protection and fault detection functions to ensure the safety of equipment and systems.

　　Maintenance: Regular maintenance of the device can extend its service life and ensure its stable performance. Maintenance includes checking the connecting cables, cleaning the surface of the device, and updating the firmware.

　　Application Scenarios

　　MTL5053 is usually used in conjunction with the MTL831B multiplexer transmitter. The MTL831B is installed in a hazardous area and connected to the sensors in the field. The MTL5053 is installed in a safe area and receives multiple analog input signals from the MTL831B through the data highway. This configuration allows multiple analog input signals to be transmitted from hazardous areas to safe areas while providing power to the transmitter via the data highway, without the need for an additional on-site power supply.

　　The MTL5053 analog multiplexer receiver is widely used in various industrial fields, such as chemical, petroleum, pharmaceutical, food processing, etc., to meet the temperature monitoring needs of different industries. It can be used in conjunction with a variety of temperature sensors to achieve real-time monitoring and control of the temperature in the production process, thereby improving production efficiency and product quality.

　　Summary

　　The MTL5053 is a high-performance, high-reliability analog multiplexer receiver suitable for various industrial automation and process control fields. It has the characteristics of high sensitivity, high-speed response, isolation protection, etc., and can be used for long-distance signal transmission and signal acquisition in harsh environments.

　　All products on this website are special products, and the market price has been fluctuating.

　　The specific quotation is subject to the customer service, because the product is a new product and the price is not real.

　　Please confirm the model and product, price and other details with the customer service before placing an order. The website has been used.

　　New ones are on sale, please contact customer service for communication.

Related product recommendations:
IS200EISBH1A
IS200ESELH1A
151X1235BC01SA01
151X1235BC01SA41
151X1215DC29SA01
VME-7807RC-424001
VMIVME-7807RC
VMIVME-017807-414001
PM867K01 3BSE076355R1
PM867K02 3BSE081638R1
PM866-2 3BSE050201R1
PM866 3BSE050200R1
PM865K01 3BSE031151R1
PM864AK01 3BSE01816R1
3BSE030193R1 PM865
3BSE018161R2 PM864AK01-eA
3BSE018105R1 PM861K01
PM866K01 3BSE050198R1
More......