3500/60 and 3500/61 Temperature Modules

Date: Oct 19, 2024 Views: 34

　　The 3500/60 & 61 modules provide six channels of temperature monitoring and accept both Resistance.Temperature Detector (RTD) and Thermocouple (TC) temperature inputs. The modules condition these inputs and compare them against user-programmable alarm setpoints.The 3500/60 and 3500/61 provide identical functionality except that the 3500/61 provides recorder outputs for each of its six channels while the 3500/60 does not.

　　The user programs the modules to perform either RTD or TC temperature measurements using the 3500 Rack Configuration Software. Different I/O modules are available in RTD/TC non-isolated or TC isolated versions. The user can configure the RTD/TC non-isolated version to accept either TC or RTD, or a mixture of TC and RTD inputs. The TC isolated version provides 250 Vdc of channel-to-channel isolation to protect against external interference.

　　When used in a Triple Modular Redundant (TMR) configuration, temperature monitors must be installed adjacent to each other in groups of three. When used in this configuration, the system employs two types of voting to ensure accurate operation and to avoid single-point failures.

　　Alarm Setpoints

　　The user can set Alert and Danger setpoints for the value measured by the monitor using software configuration. Alarms are adjustable from 0 to 100% of full-scale for each measured value. The exception is when the full-scale range exceeds the range of the sensor. In this case, the range of the sensor will limit the setpoint. Accuracy of alarms are to within 0.13% of the desired value. The Temperature Monitors have both under and over alarm setpoints.

3500-60 and 3500-61 Temperature Modules  Datasheet - 141540.pdf

Related recommendations:
3500/70M 140734-09
3500/70M 176449-08
3500/05-01-01-00-00-00
3500/05-01-01-01-00-00
3500/05-01-02-00-00-00
3500/05-01-03-00-00-00
3500/05-02-04-00-00-00
3500/53 133396-01
3500/53 133388-01
3500/72M 140471-01
ASSY78462-01U 78599-01A
more......